PGA-103+ Wideband Low Noise Amplifier

  • PGA-103+ Wideband Low Noise Amplifier

PGA-103+ Advanced wideband amplifier. Offers extremely high dynamic range with low noise figure.

The PGA-103+ has good input and output return loss over a broad frequency range.

PGA-103+ Specifications:
 
50 MHz, G=26 dB, NF=0.5 dB.
144 MHz, G=25 dB, NF=0.5 dB.
432 MHz, G=21 dB, NF=0.5 dB.
1296 MHz, G=13 dB, NF=0.65 dB.
IP3out > 37 dBm.
Power consumption +12 V / 100 mA.
Connectors: "N" Male / Female.
 
Measured results with HP8753ES network analyzer full two port calibrated:
 
PGA103+Very low noise wideband amplifier zoomed to 440MHz
PGA103+-Very-Low-Noise-Wideband-Preamplifier-Measured-S11-S21-S12-S22-to-440MHz
 
 
PGA103+Very low noise wideband amplifier zoomed data to 1.3 GHz
PGA103+-Very-Low-Noise-Wideband-Preamplifier-Measured-S11-S21-S12-S22-to-1300MHz
 
 
PGA103+Very low noise wideband amplifier, high IP3 data to 3 GHz
PGA103+-Very-Low-Noise-Wideband-Preamplifier-Measured-S11-S21-S12-S22-to-3GHz
 
 
PGA103+-Very-Low-Noise-Wideband-Preamplifier-with-High-IP3
 
It is intended to direct connection with coaxial relay like QRO Relay. To achieve lowest possible losses without any additional coaxial cable. It will insure lowest possible NF (Noise Figure) for terrestrial and EME (Earth-Moon-Earth) communications.
PGA-103+ Low noise amplifier is small enough to not to interfere with big central 7/16 DIN connector.
 
 
 
QRO Relay with PGA-103+ preamplifier:
 
 
Preamplifier-PGA103+-with-QRO-relay
Low-Noise-Amplifier-PGA103+-with-QRO-relay

 

 

Or with CZX-3500 on NO side:

PGA103+-Very-Low-Noise-Wideband-Amplifier-with-High-IP3-connected-with-coaxial-relay-CZX-3500.

Write a review

Please login or register to review
  • Product Code: 0760
  • Availability: In Stock
  • 59.00€



Tags: amplifiers, low noise, pga-103, pga-103+, preamplifier, vlna, wideband