6 Meters Low Loss Band-Pass Filter 1.5 kW, 50 - 54 MHz
50 - 54 MHz 1.5 kW Super Low Loss Bandpass Filter BPF for 6 Meter band.
Intended to be used with linear amplifiers 8877, GS35, GS31, 2xGI7B and with other tubes. 6 meter Bad-Pass filter will easily handle any 1500 W linear amplifier.
50-54MHz Bandpass Filter BPF uses high Q coils and capacitors with Q more than 4000. Low loss of filter is achieved with careful design and adjustment.
Although intention of this filter is to be used as transmitting filter, design allows also to be used as receiving filter before wideband LNA with SPF-5122Z or wideband LNA with PGA-103+ to protect sensitive device from strong out of band signals.
This BPF will suppress any harmonic on 100 MHz, 150 MHz and more.
Measured results with HP8753ES network analyzer full two port calibrated:
6 meter band, 50 MHz Economical Bandpass Receiver for Ham:50 - 51 MHz Economical, Low Loss Bandpass Filter
6 meter band, 50 MHz Receiver Bandpass for Ham:50 - 51 MHz High Selectivity, High Q, Low Loss RX Bandpass
6 meter band, 50 MHz Receiver Outdoor Bandpass:50 - 51 MHz High Selectivity High Q, Low Loss RX Bandpass - Outdoors
6 meter band, 50 MHz,300 W Bandpass for Ham:50 - 51 MHz 300 W Low Loss Bandpass Filter
6 meter band, 50 MHz, 1500 W Bandpass for Ham:50 - 51 MHz 1500 W Low Loss Bandpass Filter
6 meter band, 50 MHz, 4000 W Bandpass for Ham:50 - 51 MHz 4000 W Low Loss Bandpass Filter
We are also making filters on all frequencies and powers. Even if we don't have an offer on our site, we may be able to make it for you. So feel free to contact us via email.
You might also like to read about our 6 meter band antennas (50 MHz):6 Meter High Gain Low Noise Antennas